+8615254151728

Some processing specifications that fiber laser cutting machine processing manufacturers should pay attention to when using the equipment

Feb 15, 2021

Fiber laser cutting machine is a kind of laser cutting machine using fiber laser generator as light source. Fiber laser is a newly developed new type of fiber laser. The laser energy density is high. It is concentrated on the surface of the workpiece. The workpiece is melted and vaporized by the ultra-finely focused light irradiation area. The automatic cutting of non-contact processing is realized through the CNC mechanical system. It has the advantages of fast speed and high precision.


However, the fiber laser cutting machine is not a material that can be reduced. This is a very good equipment and has its shortcomings. While seeing its superior processing performance, we also noticed its current limitations, such as limitations on processing material properties. , Strict processing specification requirements.


Let's first talk about the materials processed by the fiber laser cutting machine. Fiber laser cutting machine is mainly a metal laser cutting machine for processing, so the main cutting metal, such as stainless steel, carbon steel, alloy steel, silicon steel, spring steel, aluminum, aluminum alloy, galvanized steel, galvanized steel, pickling Cutting of plates, copper, silver, gold, titanium and other metal plates and tubes. However, with the development of science and technology, non-metal cutting technologies such as plastics, composite materials and plexiglass have matured.


Secondly, fiber laser cutting machine is not recommended for long-term cutting of rare metal materials such as aluminum and copper. The effect is good when processing these materials, but because these materials are highly reflective materials (note: the high reflection and the smoothness of the cutting surface of the board are mainly due to The wavelength range of the laser is not ideally absorbed by these materials, the absorption effect is not good, most of the energy is reflected back, and it is easy to damage the laser protective glasses). The long-term influence of these materials may affect the subsequent processing and the result of the service life is not good , It will also increase the use of consumables. The cutting thickness of the fiber laser cutting machine varies according to its power. The greater the power, the greater the cutting thickness; the thinner the metal material, the faster the cutting speed. The fiber laser cutting machine has obvious advantages for thin plate cutting.


Another fiber laser cutting machine processing specification, because the current domestic price of fiber laser cutting machine is not acceptable to all processing manufacturers, it is often necessary to handle and maintain the equipment during use, extend the service life of the equipment, and improve the efficiency of the equipment :

1. Be sure to check the steel belt frequently. The steel belt plays a very important role in the transmission of the laser cutting machine, and the tension of the steel belt must be ensured when the equipment is running. Otherwise, once there is a problem in the operation, it is likely to hurt people and even threaten the personal safety of the staff. The steel belt seems to be a trivial matter, once something goes wrong, it will seriously affect safety in production.

2. Since the laser cutting machine evaporates directly to the metal surface during the cutting time, the cutting machine and the internal surface often produce a lot of dust. We should always use a vacuum cleaner to suck the dust to ensure that there is no pollution between the internal mechanical parts of the magazine, and more Good to maintain normal operation to reduce wear and tear between mechanical components.

3. It is necessary to regularly lubricate the parts such as the rack and rail of the laser cutting equipment, so as to ensure the accuracy of the gear engagement and maintain the stable operation of the equipment, because the machine is always running on the correct track, processing When precision parts are used, accuracy can be guaranteed.


While doing the daily maintenance of the equipment, strict inspections must be carried out when purchasing equipment and replacing equipment parts to fundamentally ensure the normal production of machinery. At the same time, if any damaged parts are found to be replaced during the use of the machine, you cannot ignore this problem with a fluke. This in itself is a kind of mechanical protection. It is also responsible for the safety of the operator, and it can also ensure that the laser cutting machine is always ideal. Cutting effect.


Send Inquiry