+8615254151728

Specific Operation Steps Of Laser Cutting Machine

Feb 09, 2021

1. Turn on the machine in strict accordance with the regulations and the principles of power-on and power-off. Do not close or open forcibly;

2. Turn on the air switch, emergency stop, and key switch (see if there is an alarm display for the temperature of the water tank);

3. Turn on the computer and turn on the "Start" button when the computer is fully booted;

4. Turn on the motors in turn, enable, follow, laser, red light buttons;

5. Start the machine and import the CAD drawing;

6. Adjust the initial processing speed, tracking delay and other parameters;

7. Adjust the focus and center of the laser cutting machine.


Send Inquiry